Filter
Top Products
4
2) Position the showcase in a selected site. Clean the interior with soap and water and
rinse thoroughly.
3) Level the showcase in both the left-to-right and the front-to-rear directions.
4) The perimeter where the machine touches the counter should be sealed with silicone.
4. ELECTRICAL CONNECTIONS
* This showcase must be plugged into the separated power receptacle which has enough
capacity. The maximum allowable voltage variation should not exceed ± 10 percent of the
nameplate rating. See the nameplate.
5. DRAIN CONNECTIONS
* The hose may be connected to either right or left joint, whichever is convenient.
* Keep more than 2 vertical inch (5 vertical cm) air gap between the drain pipe end and the
sink.
Fig. 5
Hose
Joint
Joint