Filter
Top Products
2
All IM models have similar sequence of operation. This manual is designed as a
generic IM Training manual.
The Hoshizaki IM series ice machine
uses a horizontal evaporator design.
This compact unit is designed for
counter-top, under-counter, or free-
standing installations.
A standard 120 volt power cord
provides the electrical connection.
The unit is designed to operate on a
separate 15 amp circuit.
The water supply connection is
½”FIP and is located at the bottom
right rear of the unit. A minimum
3/8” water line is required for proper
operation.
The drain connection is ¾”MIP and
is located on the left rear of the unit.
Since the unit will likely be enclosed,
it is recommended to use flexible
supply and drain connections. This
will allow easy removal if service is
necessary.
Access to the evaporator
compartment is gained by removing
the front and top covers.
Open the bin door and remove the
front cover screws and drain pan
thumbscrews. Lower the drain pan
pipe into the drain hole.
Lift upward on the front panel and
push backward to remove the top
cover.