Filter
Top Products
72
16. Removal and Replacement of Bin Control
1) Turn off the power supply.
2) Remove the front panel and top panel.
3) Remove the two thumbscrews securing the switch cover.
4) Lift the bin control assembly out of the icemaker.
5) Lift off the insulation, then remove the two thumbscrews attaching the bin control to the
switch cover.
6) Use the thumbscrews to attach the new bin control to the switch cover.
7) Replace the removed parts in the reverse order of which they were removed.
Fig. 4
Thumbscrews
Insulation
Bin Control
Switch Cover