Hotpoint 910 Dishwasher User Manual


 
9
EN
Wash options
The OPTIONS may only be set, modified or reset after
the wash cycle has been selected and before the Start/
Pause button has been pressed.
Only the options which are compatible with the type of
wash cycle set may be selected. If an option is not compat-
ible with the selected was cycle
(see Table of wash cycles)
,
the corresponding LED flashes rapidly 3 times.
If an option is selected which is incompatible with another
option or wash cycle selected previously, the incompat-
ible option light will flash 3 times and switches off, while
the most recently selected setting remains lit.
To deselect an option which has been set by mis-
take, press the corresponding button again.
Delay Start
The start of the wash cycle may be delayed for a period of
time between 1 and 24 hours.
1. After selecting the desired wash cycle and any other
options, press the DELAY START button: the corresponding
indicator light will illuminate. Use the same button to select
the time at which you wish the wash cycle to begin (after a
period of 1 to 24 hours).
2. Confirm your selection using the Start/Pause button; the
countdown will begin. The selected delay period indicator
light is displayed and the Start/Pause button stops flashing
(the light becomes fixed instead).
3. When the set time has elapsed, a long beep sounds, the
DELAY START indicator light switches off and the wash
cycle begins.
To deselect the DELAY START option, press the DELAY
START button repeatedly until the text OFF appears.
The Delay Start function cannot be set once the wash
has been started.
Half load
If there are not many dishes to be washed, a half load
cycle may be used in order to save water, electricity and
detergent. Select the wash cycle and press the HALF LOAD
button: the indicator light will illuminate.
Remember to halve the amount of detergent.
It is better to use powder detergent in this case.
This option is incompatible with the following wash
cycle: Rapide wash.
Multi-functional tablets (Tabs)
This option optimises washing and drying results.
When using multi-functional tablets, press the MULTI-
FUNCTIONAL TABLETS button. The corresponding indicator light
will illuminate. The “Multi-functional tablets” option results in the
lengthening of the wash cycle.
The MULTI-FUNCTIONAL TABLETS option remains
set for subsequent wash cycles if it is not deselected.
The use of tablets is only recommended for models
which offer the MULTI-FUNCTIONAL TABLETS option.
This option is not recommended for use with wash
cycles which do not specify the use of multi-functional
tablets
(
see Table of options
).
This option is incompatible with the following wash cycle:
Soak.
A B C
Table of options
Delay
Start
Half
Load
Tabs
1. Eco
Yes
Yes
Yes
2. Auto Normal
Yes
Yes
Yes
3. Prewash
Yes
Yes
No
4. Intensive
Yes
Yes
Yes
5. Speed 25’
Yes
No
Yes
6. Delicate
Yes
Yes
Yes
7. Shortime
Yes
No
Yes
8. Good Night
Yes
No
Yes