Rear
Left
Front
Right
CAUTION:IF ANY CRACK IN SURFACE BECOMES VISIBLE, TURN OFF THE MAINS COOKER SWITCH.
Under no circumstances should the hob be used with aluminium foil in contact with the hob surface.
The following boiling plates are located beneath the circular cooking areas:-
The cooking areas change colour when heated (become red) indicating
which heating
element is turned on. The cooking area returns to its original colour when the heating
element is switched OFF and cools.
Hotplates
When the control is turned from the 0 position, the settings on the control panel will show
1 - 6, these are 6 fixed positions for cooking.
6 is the highest setting,for fast cooking.To reduce the heat to cook more slowly or simmer,
turn the knob to a lower setting which will vary according to size and type of saucepan,the
amount and type of food, and whether or not the lid is fitted. Pans can be placed on the
unheated areas of the panel when cooking is finished and before serving food.
It is inadvisable at any time to leave a heating element switched on without a pan in
position as this wastes energy, and could make soil or rub-off from aluminium pans more
difficult to remove. To protect
elements against overheating, safety cut-outs have been
incorporated
with each element.After several minutes with the control at setting 6 the
safety cut-out switches the element Off and On continuously,thus preventing any adverse
effects that may be caused by an excessive build-up of heat in the cooking area.
Setting 1 provides low input for simmering.The control will be Off when the control knob
is turned to the O position.
If the hob should become cracked,never use until repaired. Always ensure that saucepan
handles are positioned safely.
Ceramic Hob (C362E and C363E)
21
Rear
Right
Front
Left
6 Heat 1800W
6 Heat 1200W
6 Heat 1200W
6 Heat 1500W
C362E / C363E