Hotpoint CH60GPCF Cooktop User Manual


 
30
PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24
CARE AND CLEANING
BURNER MAINTANANCE INSTRUCTIONSBURNER MAINTANANCE INSTRUCTIONS
BURNER MAINTANANCE INSTRUCTIONSBURNER MAINTANANCE INSTRUCTIONS
BURNER MAINTANANCE INSTRUCTIONS
Before cleaning the burners ensure the appliance is switch off and isolated from theBefore cleaning the burners ensure the appliance is switch off and isolated from the
Before cleaning the burners ensure the appliance is switch off and isolated from theBefore cleaning the burners ensure the appliance is switch off and isolated from the
Before cleaning the burners ensure the appliance is switch off and isolated from the
electriacl supply and the appliance is cold.electriacl supply and the appliance is cold.
electriacl supply and the appliance is cold.electriacl supply and the appliance is cold.
electriacl supply and the appliance is cold.
MAIN OVENMAIN OVEN
MAIN OVENMAIN OVEN
MAIN OVEN
When the main oven is used regularly, its burner is susceptible to being covered with grease and
dirt.
This might result in problems with the burner’s ignition as well as the uneven or disappearing flame.
To solve the problem clean the burner with a small amount of water- diluted cleaner (e.g. CIF) using
a small brush (e.g. a toothbrush). After cleaning wipe the burner with a cloth to remove the
detergent waste and let it dry for at least 2 hours.
WARNING!WARNING!
WARNING!WARNING!
WARNING!
1. Brush the burner in the directions indicated below.
2. DO NOT re-ignite the burner with the detergent residue.
TOP OVEN/GRILLTOP OVEN/GRILL
TOP OVEN/GRILLTOP OVEN/GRILL
TOP OVEN/GRILL
When the Top oven/grill is used regularly, its burner is susceptible to being covered with grease
and dirt.
This might result in problems with the burner’s ignition as well as the uneven or disappearing flame.
To solve the problem clean the burner with a small amount of water- diluted cleaner (e.g. CIF) using
a small brush (e.g. a toothbrush). After cleaning wipe the burner with a cloth to remove the
detergent waste and let it dry for at least 2 hours.
WARNING!
1. Brush the burner in the directions indicated below.
2. DO NOT re-ignite the burner with the detergent residue.