Hotpoint DQ47 Microwave Oven User Manual


 
Care and Cleaning
39
3. OVEN DOORS
(a) Control Panel
Regularly wipe with a clean, damp cloth and polish with a
clean, dry cloth.
(b) Trims
It is advisable to clean the trims regularly to prevent any
build up of soiling which may detract from the appearance of
the cooker. The recommended method of cleaning is to wipe
over the trims with a clean, soft cloth wrung out in warm
water, or mild non abrasive cleaner. (If in doubt try the
cleaner on a small area of trim which is not noticeable in
normal use), then after wiping with a cloth wrung out in clear
water, dry with a clean, soft cloth.
(c) Inner Door Panels & Glass
Open the door fully. The glass panel may now be washed.
Stubborn stains can be removed by using a well soaped, fine
steel wool soap pad.
(d) Stainless trims (DE77 & DE47 only)
Regularly wipe with a clean, damp cloth and polish with a
clean dry cloth.
DO NOT use scouring pads, or abrasive powder, which will
scratch the glass.
CONTROL PANEL
TRIMS
OVEN
DOORS
4. REPLACEMENT OF THE OVEN LAMP
Open the oven door and remove the oven shelves.
Using a thick cloth, grip the lamp lens, unscrew anti-
clockwise and remove the lens.
Carefully unscrew the bulb anti-clockwise.
Fit replacement bulb (15W 300°C SES) and refit lens.
5. HOW TO CLEAN THE LAMP LENS
Open the oven door and remove the oven shelves.
Using a thick cloth, grip the lamp lens, unscrew anti-
clockwise and remove.
Clean with a non-abrasive cleansing cream and refit
lamp lens.
Warning: To avoid electric shocks - please ensure that
the electricity supply to the appliance is switched off and
the appliance is fully cold, before removing the lamp lens.
Warning: To avoid electric shocks - please ensure that the
electricity supply to the appliance is switched off and the
appliance is fully cold, before cleaning lamp lens.
DO NOT use scouring pads, or abrasive powder, which will
scratch the glass lens
TOP OVEN LAMP
MAIN OVEN LAMP
TOP OVEN LAMP
MAIN OVEN LAMP