Hotpoint DWF30 Dishwasher User Manual


 
Electrical Supply...
3
WARNING: This appliance must be earthed.
Fuses
Your appliance comes fitted with a plug and a 13A fuse.
If you need to replace the fuse,only those rated at 13A and ASTA
approved to BS1362 should be used.
WARNING: Do not use the plug unless the fuse cover is fitted.
Changing the Mains Lead
A special lead can be ordered from your Service Department:
UK:08709 066 066 or
Republic of Ireland:1850 302 200
If you have damaged the existing lead or require a longer one a charge will be made. It is
strongly advised that this work is carried out by a qualified electrician.
Changing the plug
Cut off and dispose of the supplied plug if it does not fit your socket.
WARNING: To avoid a shock hazard do not insert the discarded plug into a socket anywhere
else.
IMPORTANT:WIRES IN THE MAINS LEAD ARE COLOURED IN ACCORDANCE WITH THE
FOLLOWING CODE:
Green and yellow (Earth) wire to
terminal marked ‘E’,symbol ,
or coloured green and yellow.
Blue (Neutral) wire to terminal
marked ‘N’or coloured black.
Cord
clamp
13A ASTA approved fuse
to BS1362.
Brown (Live) wire to
terminal marked ‘L’or
coloured red.
Green / Yellow - Earth
Blue - Neutral
Brown - Live
If you change the plug,the colour of
the wires in the mains lead may not
correspond with the colour of the
markings identifying terminals in the
plug. You should therefore wire it as
shown.
FP105-01 DWF35/34/33/30 12/02/2002 10:22 am Page 3