Filter
Top Products
UNPACKING
Unpack the components from inside the grill and ovens: Check that the following
parts are present.
Meat pan Pan supports
Grill pan, grid and handle LPG conversion kit
Hotplate burner parts Oven & Grill shelves
Griddle (model EG1000GX only) Literature pack
After unpacking your cooker, make sure that you remove all the packing from the
oven and grill, and any stickers from the oven door and the hob.
LEVELLING
Your cooker is heavy, so it would be advisable for two people to move it. The
cooker is fitted with rear wheels and will slide into position easily. Movement of
your cooker is most easily achieved as follows. Open the grill/oven door
sufficiently to allow a comfortable grip on the underside front edge of the oven
roof, avoiding any grill or oven interior furniture, and then lift and slide back at
the same time.
Your cooker must stand on a flat surface so that the hob is perfectly level, and
the cooker is stable and cannot be rocked, this is easily achieved by adjusting
the feet which are under the front of the cooker and the castors under the
rear of the cooker, if necessary.
STABILITY CHAIN
The cooker must be fitted with a stability device firmly secured to the fabric of
the building. The M6 bolt at the top of the rear of the cooker can be used to
engage a stability chain. Keep the chain clear of controls and pipes on the rear of
the cooker.
The chain must be fitted to the wall behind the cooker.
NOTE: If the cooker is to be placed on a base, precautions must be taken to
prevent it from slipping off the base.
31
Installation