Hotpoint ET6124 Cooktop User Manual


 
11
Hob care
The vitroceramic glass used for the heating surface is
smooth and poreless and it is also resistant to thermal
shocks and to mechanical shocks under normal condi-
tions of use. In order to preserve these properties, we rec-
ommend you care for your hob as follows:
• for ordinary maintenance, just wipe it with a damp
sponge and dry it thoroughly using paper towels.
• If the hob is dirty, rub clean using a special cleaner
suitable for vitroceramic glass, rinse off and dry thor-
oughly.
• food residue and dirt can be removed using a special
scraper. Do this as soon as possible, do not wait for
the hob to cool down in order to avoid incrustations.
For excellent results, use a special stainless steel
wool pad for vitroceramic glass cleaning soaked in
soapy water.
• When the hob is clean, you can apply a special prod-
uct for the care and protection of the same: this type
of product leaves an invisible film on the surface of
the hob to protect the same against any spills and
boiled-over food. It is best if you do this when the
hob is lukewarm or cold.
• Make sure you always rinse the hob with clean water
and dry it thoroughly: otherwise the cleaning prod-
ucts could become encrusted onto the hob during
subsequent cooking.
Recommendations
Never use abrasive or corrosive substances, such
as aerosol cleaners for grills and ovens, stain remov-
ers or rust removers, scouring powders and abrasive
sponges: even the delicate ones could scratch the
hob surface irreversibly.
• We recommend you keep all items which could melt
away from the hob, such as plastic utensils, sugar
or products with a high sugar content. Should liq-
uid boil over onto the hob surface, remove it immedi-
ately (while the hob is still hot) using a razor blade
scraper, in order to avoid damaging the surface.
Use this hob exclusively for cooking. Do not place
items on the hob when the same is not in use. Do not
use the hob as a work surface (by placing lids, sauce-
pans or dishcloths on it, for example), nor as a chop-
ping board.
• Never leave aluminium wrappers, aluminium foil and
plastic cookware on the hob when hot or still warm.
• Do not use steam cleaners or high pressure cleaners
to clean your appliance.
• Do not place metal items on the hob (such as knives,
spoons, lids, etc.).
• Never heat up unopened tins: they could burst.
The guarantee does not cover damage to the hob caused
by incorrect use.
Maintenance and care
Advice on using your appliance
To get the best from your hob, it is vital that you follow a
few fundamental rules during cooking and when preparing
food.
Use pans with a flat bottom so they adhere fully to the
heating zone.
Always use pans whose diameter covers the cooking
zone fully so that all the available heat can be used.
Make sure the pan base is always clean and dry, to
guarantee good contact and long life for the cooking
zones and pans alike.
Avoid using pans used normally on gas burners. The
concentration of heat on gas burners can warp the
bottom of the pan, consequently you would never obtain
the desired result when using the pan on the glass
ceramic hob.
Never leave a cooking zone on without a pan on it as
the maximum heat level would be reached very quickly,
which could damage the heating elements.
The glass ceramic hob is resistant to thermal and
mechanical shocks. However, it may break due to a
shock caused by a sharp object. In this case, unplug
the appliance immediately and contact an authorised
after-sales service centre to have it repaired.
Always keep your hob clean. Before proceeding with main-
tenance operations, check that all the cooking zones are
turned off and have cooled down completely.
Stainless steel frame (only on some models)
Stainless steel can stain as an effect of enduring contact
with limescale in water or as an effect of highly aggres-
sive detergents (containing phosphorus). We recommend
you rinse and dry it thoroughly after maintenance. It is
preferable to remove any water spills immediately.