Filter
Top Products
1
●
&
RINSE & HOLO
(MUEOOWOFO
Dial Cycles
The RINSE & HOLD cycle is for rinsing
partial loads which will be washed later.
Do not
use
detergent.
a.
Mtie
sure HEATED DRY is off.
b. Be sure the door is unlatched.
c. Slowly turn the Cycle Indicator Dial to
RINSE & HOLD.
d. Latch the door to start the cycle.
The PLATE WARMER cycle is for warming
clean dishes and serving plates for the serving
of hot foods. The cycle will
t~e
approximately
32 minutes if selected.
a. Load clean plates and dishes to be warmed.
b. Select HEATED DRY on.
c. Be sure the door is unlatched.
d. Slowly turn the Cycle Indicator Dial to
PLATE WARMER.
e. Latch the door to start the cycle.
Cycle Selection Chart
Wash
Cycle
Water Use
Time
Gallons Minutes
Wash Cycles
(approx.)
(approx,)
Cycle Sequence
POTS & PANS
10.6
72*
mmmmmmm
NORMAL WASH
9.1
5]*
mmmmBm
WATER
SAVER
6.4
5]*
mmmm
RINSE & HOLD
3.0
12
Bm
*Unex[endcd
times.
These
cycle
times
will
be
increased approximately 21 minutes if HEATED WASH option is selected.
Drying Options:
HEATED DRY.
Availahle
on
all
wash
cycles
except RINSE & HOLD. Add 35 minutes
to
wash
cycle time.
ENERGY SAVER. Drying heater is turned
off.
Dishes dry naturally.
5
c