Hotpoint HS93X Ventilation Hood User Manual


 
4
Electrical connection
! Arrange the electrical power supply within the
decorative flue dimensions.
! When making the electrical connections, check that
the voltage values correspond to those indicated on
the data plate inside the appliance itself.
! In case your appliance is not furnished with a non
separating flexible cable and has no plug, or has not
got any other device ensu-ring omnipolar
disconnection from the elec-tricity main, with a
contact opening distance of at least 3 mm, such
separating device ensuring disconnection from the
main must be included in the fixed installation.
! If your unit features a power lead and plug, position
this so the plug is accessible.
! The following warning is valid in the United
Kingdom only (in case your cable is not furnished
with a plug). As the colours of the wires in the
mains lead of this appliance may not correspond
with the coloured markings identifying the terminals
in your plug, proceed as follows: – the wire which is
coloured blue must be connected to the terminal
which is marked with the letter N or coloured black;
– the wire which is coloured brown must be
connected to the terminal which is marked with the
Technical information
Technical data
Model HS 63 X HS 73 X HS 93 X / HSD 93 I
Dimensions width 59.8 cm width 69.8 cm width 89.8 cm
height 68/119 cm height 68/119 cm height 68/119cm
depth 49 cm depth 49 cm depth 49 cm
Outlet pipe diameter 15 cm Outlet pipe diameter 15 cm Outlet pipe diameter 15 cm
Gross weight 14.6 Kg 15.6 Kg 19.1 Kg
Absorption Total 220 W Total 260 W Total 260 W
Motor 1x140 W Motor 1x180 W Motor 1x180 W
Lamps 2x40 W Lamps 2x40 W Lamps 2x40 W
Flow rate 450 m
3
/h 600 m
3
/h 600 m
3
/h
Grease filters
Suction
surface area 1487 cm
2
1773 cm
2
2287 cm
2
letter L or coloured red. For hoods in insulation
class 1 (mod.HS63X): – terminal of a three-pin
plug. For hoods in insulation class 1 (Mod. HS73X-
HS93X-HSD93I): – the wire which is coloured
green and yellow must be connected to the terminal
in the plug which is marked with the letter E or by
the earth symbol [
], or coloured green or green
and yellow.
Power cable
! Warning: The hood is fitted with a specially
prepared cable (except for the hood model HS63X);
if the cable is damaged, it must be replaced with a
cable or special cable assembly, available at the
manufacturer or its technical service.
GB