Filter
Top Products
GB
11
STEP 6. Press the Time/Mode button, until the
'end time' symbol is flashing. The
display will show a default cooking end
time (this will be the current time plus
the cooking duration you set in STEP 5).
The 'end time' symbol will flash.
STEP 7. Turn the +/- control knob to set the time
you wish the cooking to end. After a few
seconds the display will show the
temperature, cooking duration and end
time in turn.
THE COOKING DURATION AND END TIME IS
NOW SET.
The display will show the temperature and cooking
duration when the programme has started.
-
+
Main Oven
Light
Time/Mod
e
At the end of the cooking duration, 'End' and the
'cooking duration' symbol will show in the display
and an audible tone will be heard for a few seconds.
Turn the main oven control to 'O', the OFF position to
switch the oven off. The display will revert back to
the time of day.
To cancel the automatic mode at any time turn the
main oven control to 'O', the OFF position.
Note: At any time up to the start of cooking, the
cooking end time, cooking duration and the
temperature will be shown in the display.
Electronic Clock & Automatic
Cooking Feature
This product complies with the requirements of
the latest European Directive on the limitation of
power consumption
by the use of an Automatic ‘Stand-by’ mode.
Full ‘Standby’ is achieved when both:
The Oven is not in Use::
If the ovens are NOT in use, and the oven
controls have not been operated for a period of
approximately 2 minutes, the timer display
automatically switches to its ‘stand-by’ mode.
When in ‘standby mode’, the time of day is not
visible and just the “watch icon” is illuminated
on the timer display. As soon as interaction with
the oven controls, or with any of the timer
buttons resumes, the full timer display,
(including the ‘time of day’), will be restored
and the ‘watch icon’ will go out
AND
The Hob is not in Use:
If no operations of the hob controls are carried
out for a period of a few minutes after all
hotplates have been turned off , and once the hob
has cooled sufficiently, the “hot hob indicators”
on the hob glass go out, indicating that the hob
is in ’’ stand-by mode”.
When any of the hotplates are next used, the
appropriate hob hot light(s) will be illuminated
again. Operation of the hob controls does not
affect the timer display