Filter
Top Products
GB
13
PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24
Programming delayed automatic cleaning
! Programming is possible only after selecting the FAST CLEAN mode.
1. Press the button and set the end time using the and buttons.
2. Once you have reached the desired end time, press the button again.
3. Press the button to activate the programmed mode.
4. When the selected time has elapsed, “END” appears on the TEMPERATURE
display and a buzzer sounds.
• For example: it is 9:00 a.m. and the Economy (ECO) FAST CLEAN level
has been selected, with the default duration of 1 hour. 12:30 is scheduled
as the end time. The programme will start automatically at 11:30 a.m.
The icons and ash to indicate that programming has taken place.
After programming, in the time before the Fast Clean mode starts, the TIME
display indicates the duration and end of the Fast Clean mode alternately.
To cancel programming press the button.
Once the automatic cleaning cycle is over
Before you can open the oven door, you will have to wait for the icon to
switch off: this indicates the oven temperature has dropped to an acceptable
level. You will notice some white dust deposits on the bottom and the sides
of your oven; remove these deposits with a damp sponge once the oven
has cooled down completely. Alternatively, you can make use of the already
heated oven, in which case it is not necessary to remove the deposits, they
are completely harmless and will not affect your food in any way.
NOTICE
Do not place
or rest anything
on the open door
Make sure that the racks
and dripping pans have been
inserted fully before closing the door
Please read the manual
carefully for information
regarding the automatic
cleaning (pyrolytic) cycle
GB