Hotpoint DWF61 Dishwasher User Manual


 
Regular inspection and maintenance of your
appliance helps to prevent problems from
occurring.This saves time and aggravation.
You should therefore carefully inspect the
inside of your dishwasher from time to time.
Overall condition of appliance.
- Check that no grease or scale has
accumulated on the inside of the
dishwasher.
If you discover any deposits:
- Clean the interior of the dishwasher
thoroughly with a detergent solution.
Dishwasher salt.
The SALT REFILL indicator 5 on the control
panel will illuminate when salt is required.You
can also check the salt container itself.
Rinse-aid.
The RINSE-AID indicator 6 on the control
panel will illuminate when rinse-aid is
required.Also check the level indicator on the
container.
Filters.
The filters prevent large particles of food or
other objects from getting inside the pump.
This residue can occasionally block the filters.
The filter system consists of a filter cylinder,a
flat fine filter and depending on the Model, a
microfilter (*).
- Inspect the filters for obstructions every
time the dishwasher has been used.
- By unscrewing the filter cylinder,you
can remove the filter system. Remove
any food remnants and clean the filters
under running water.
Remove any particles of food and rinse
the filters under running water.
Reassembly:
- Insert the filter system and screw down
with the filter cylinder.
Ensure that the filter is locked in place by
screwing down until the two arrows are
aligned (as above).
Care and Maintenance...
21