Filter
Top Products
16
GB
PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24
1. Economy (ECO): turn the knob towards “ ”. Duration: 1 hour.
2. Normal (NOR): initial level. Duration: 1 hour and 30 minutes.
3. Intensive (INT): turn the knob towards “ ”. Duration: 2 hours.
4. Press the button to conrm.
The end of the FAST CLEAN cycle may be programmed in
the same way as a normal cooking cycle (see Programming
the automatic cleaning end time).
! The desired Fast Clean mode will be conrmed and started
automatically if the CLOCK icon button is not pressed within
10 seconds from selecting the cooking time.
! If the oven is too hot, the pyrolysis cycle may not begin
or the word END may appear on the display. Wait for the
oven to cool down.
Safety devices
• The icon on the display, when lit, indicates that
the oven door was automatically locked as soon as the
temperature reached a high value.
• If a malfunction occurs, the heating elements will be
switched off.
• Once the oven door has been locked, it will no longer be
possible to modify the duration and end of cycle settings.
Programming the automatic cleaning end time
1. Press the button until the icon and the two
numerical digits on the DISPLAY begin to ash.
2. Turn the SET TIME knob towards “ ” and “ ” to adjust
the time.
3. Press the button again, until the other numerical digits
on the DISPLAY begin to ash.
4. Turn the SET TIME knob towards “ ” and “ ” to adjust
the minute value.
5. Press the button again to conrm.
6. Once the set time period has elapsed, the text END
appears on the DISPLAY and a buzzer sounds.
• For example: it is 9:00 and you have selected the
Economy (ECO) FAST CLEAN mode, which has a
default time of 1 hour. The end of the cycle is scheduled
for 12:30, meaning it will begin automatically at 11:30.
If programming has been scheduled and conrmed, the
e buttons will be illuminated. The duration and the FAST
CLEAN end time will appear alternately on the DISPLAY.
At the end of the automatic cleaning cycle,
you will have to wait until the temperature inside the oven
has cooled down sufciently before you can open the
oven door. You will notice some white dust deposits on the
bottom and the sides of your oven; remove them with a
damp sponge once the oven has cooled down completely.
If, on the other hand, you wish to make use of the residual
heat inside the oven, you do not have to remove the dust
deposits as they are completely harmless and will not affect
your food in any way.
NOTICE
Do not place
or rest anything
on the open door
Make sure that the racks
and dripping pans have been
inserted fully before closing the door
Please read the manual
carefully for information
regarding the automatic
cleaning (pyrolytic) cycle
GB