8
GB
PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24
! To guarantee perfectly soft or crispy food, the oven
releases water contained within the food in the form
of steam. This means it is possible to achieve
optimal cooking results for all dishes.
! Every time the oven is switched on, it suggests the
first CREATION cooking mode.
! Never put objects directly on the bottom of the
oven; this will prevent the enamel coating from being
damaged.
! Always place cookware on the rack(s) provided.
ExtraLarge Space
Starting the oven
1. Switch the control panel on by pressing the
button. The appliance buzzer sounds three times
(ascending) and all buttons light up in sequence.
2. Press the button corresponding to the desired
cooking mode. The TEMPERATURE display shows:
- the temperature associated with the mode, if
programming manually;
- “Auto”, if programming is automatic.
The TIME display shows:
- the current time, if programming manually;
- the duration, if programming is automatic.
3. Press the
button to begin cooking.
4. The oven will begin its preheating stage: the
preheating light flashes.
5. When the preheating process has finished, a
buzzer sounds and the preheating indicator light
shows that this stage has been completed: the food
can then be placed in the oven.
6. During cooking it is always possible to:
- change the temperature by pressing the
button, followed by the + and - buttons (manual
modes only);
- set the duration of a cooking mode (see Cooking
Modes);
- press the
button to stop cooking. In this case
the appliance stores the temperature modified
previously in its memory (manual modes only);
- switch off the oven by pressing the
button for 3
seconds.
7. In case of a blackout, if the oven was already
operating, an automatic system within the appliance
will reactivate the cooking mode from where it was
interrupted as long as the temperature did not drop
below a certain level. Programmed cooking modes
which have not yet started will not be restored and
must be reprogrammed.
! There is no preheating stage for the BARBECUE
mode.
CREATION cooking modes
! All cooking modes have a default cooking
temperature which may be adjusted manually to a
value between 30°C and 250°C as desired (300°C for
GRILL mode). CREATION cooking modes include
all manual programmes.
The oven controls all essential aspects of each of
these cooking modes and makes it easier for you to
create the perfect dish, from the simplest recipe to
the most sophisticated culinary delights: the
temperature, heat source, humidity and fan assisted
operation are all controlled automatically.
This chapter was written with the help of our very
own culinary expert. We invite you to follow his
advice so you can benefit from his experience and
perfect your cooking skills.
The recommended cooking modes, temperatures
and oven shelf heights reflect our expert’s own
experience in the kitchen and will help you achieve
the very best results.
The table below specifies whether it is best to
pre-pre-
pre-pre-
pre-
heatheat
heatheat
heat your oven or not for each CREATION cooking
mode. Observing these suggestions will guarantee
perfect results.
If you wish to place food in a preheated oven, wait
for the preheating stage to be completed (this will
be signalled by a series of beeps).
The temperature is set automatically, according to
the cooking mode selected; however, you may
adjust it to suit your recipe.
You can also set a cooking duration with an
immediate or delayed start.
MULTILEVEL mode
All heating elements and the fan are activated. Since
the heat remains constant throughout the oven, the air
cooks and browns food in a uniform manner. A
maximum of two racks may be used at the same time.
GRILL mode
The top heating element and the rotisserie spit
(where present) are activated. The high and direct
temperature of the grill is recommended for food
which requires a high surface temperature. Always
cook in this mode with the oven door closed (see
“Practical cooking advice”).
FAN GRILLING mode
The top heating element and the rotisserie spit
(where present) are activated and the fan begins to
operate. During part of the cycle the circular heating
element is also activated. This combination of
Modes
*
Only available in certain models.