Hotpoint Oven Oven User Manual


 
GB
11
PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24
The table below species whether it is best to pre-heat your
oven or not for each CREATION cooking mode. Observing
these suggestions will guarantee perfect results.
If you wish to place food in a preheated oven, wait for the
preheating stage to be completed (this will be signalled by
a series of beeps).
The temperature is set automatically, according to the
cooking mode selected; however, you may adjust it to
suit your recipe.
You can also set a cooking duration with an immediate or
delayed start.
MULTILEVEL mode
All heating elements and the fan are activated. Since the
heat remains constant throughout the oven, the air cooks and
browns food in a uniform manner. A maximum of two racks
may be used at the same time.
LOW TEMPERATURE modes
This type of cooking can be used for proving, defrosting,
preparing yoghurt, heating dishes at the required speed and
slow cooking at low temperatures. The temperature options
are: 40, 65 and 90°C.
PIZZA mode
The top and circular heating elements switch on and the fan
begins to operate. This combination heats the oven rapidly.
If you use more than one rack at a time, switch the position
of the dishes halfway through the cooking process.
SUCCESS cooking modes
! The temperature and cooking duration are pre-
set values, guaranteeing a perfect result every time -
automatically. These values cannot be adjusted and use
the C.O.P.® (Programmed Optimal Cooking) system. The
cooking cycle stops automatically and the oven indicates
when the dish is cooked. You may start cooking whether
the oven has been preheated or not. The cooking duration
can be customised according to personal tastes, modifying
it - before the start time - by ±5/20 minutes depending on
the selected programme. Once cooking has begun, it is still
possible to modify its duration. If the value is modied before
cooking begins, it is stored in the appliance memory and
suggested again when that cooking mode is next used. If
the temperature inside the oven is higher than the suggested
value for the selected mode, the text “Hot” appears on the
TEMPERATURE display and it will not be possible to begin
cooking; wait for the oven to cool.
! When the cooking stage has been reached, the oven
buzzer sounds.
! Do not open the oven door as this will disrupt the cooking
time and temperature.
BEEF mode
Use this function to cook beef and pork. Place the food
inside the oven while it is still cold. The dish may also be
placed in a preheated oven.
CHICKEN mode
This function is ideal for cooking chicken (whole or in
pieces). Place the food inside the oven while it is still cold.
The dish may also be placed in a preheated oven.
DESSERTS mode
This function is ideal for cooking desserts which are made
using natural yeast, baking powder and desserts which
contain no yeast. Place the dish in the oven while it is still
cold. The dish may also be placed in a preheated oven.
Using the Small Space and Main Space at
the same time
! Simultaneous operation is only possible when using
CREATION cooking modes.
Starting the oven
For simultaneous use, simply start a cooking mode for both
cavities in succession.
The TEMPERATURE display shows the cooking parameters
for both cavities.
! Thanks to the high energy efciency of the appliance, it
only takes around 15 minutes for the SMALL SPACE cavity
to preheat.
Programming cooking
! A cooking mode must be selected before programming
can take place. Cooking can also be programmed for the
various cavities.
Programming the cooking duration
1. Press the icon; the icon and the numerical digits
on the display begin to ash.
2. To adjust the time as desired press the “ ” and “ ” icons.
3. Once you have reached the desired duration, press the
icon again.
4. Press the icon to begin cooking.
5. When cooking has nished, “END” appears on the display
and a buzzer sounds.
For example: it is 9:00 a.m. and a duration of 1 hour and
15 minutes is programmed. The programme will stop
automatically at 10:15 a.m.
Programming delayed cooking
! A cooking duration must be set before the cooking end
time can be scheduled.
! For the delayed programming to work properly, the clock
should be set to the correct time.
1. Press the icon and repeat steps 1 to 3 as described
for the duration setting.
2. Press the icon and the numerical digits on the display
will begin to ash.
3. To adjust the cooking end time value press the “ ” and
” icons.
* Only available in certain models