Consumer SupportTroubleshooting TipsOperating Instructions
Safety Instructions
Installation Instructions
25
www.Hotpoint.com
Problem Possible Causes What To Do
Automatic icemaker Icemaker power switch •On power switch models, set the power switch to the
does not work is not on. I (on) position. On feeler arm models, move the feeler
(on some models) arm to the ON (down) position.
Water supply turned off or •See Installing the water line.
not connected.
Freezer compartment •Wait 24 hours for the refrigerator to completely
too warm. cool down.
Piled up cubes in the storage •Level cubes by hand.
bin cause the icemaker
to shut off.
Frequent “buzzing” sound Icemaker is on but the water • Turn the icemaker off. On power switch models, set the
supply to the refrigerator has power switch to the O (off) position. On feeler arm
not been connected. models, move the feeler arm to the STOP (up) position.
Keeping it on will damage the water valve.
Cubes too small Water shutoff valve connecting •Call the plumber to clear the valve.
refrigerator to water line may
be clogged.
Slow ice cube freezing Door left open. •Check to see if package is holding door open.
Temperature control dial •See About the temperature control dial.
not set cold enough.
Ice cubes have Ice storage bin needs cleaning. •Empty and wash bin. Discard old cubes.
odor/taste
Food transmitting odor/taste •Wrap foods well.
to ice cubes.
Interior of refrigerator •See Care and cleaning.
needs cleaning.
Moisture forms on Not unusual during •Wipe surface dry and reset temperature control dial
cabinet surface periods of high humidity. one setting colder.
between the doors
Moisture collects inside Too frequent or too
(in humid weather, air long door openings.
carries moisture into
refrigerator when doors
are opened)
Refrigerator has odor Foods transmitting •Foods with strong odors should be tightly wrapped.
odor to refrigerator.
•Keep an open box of baking soda in the refrigerator;
replace every three months.
Interior needs cleaning. •See Care and cleaning.