Hotpoint SD97PC Oven User Manual


 
GB
10
(A)Programmed cooking with immediate start
Cooking starts immediately and comes to an automatic
stop when the end cooking time is reached.
Proceed as follows:
set the function selector to the required mode,
set the temperature using the temperature control
(in steps of 10° at a time) if the recommended one is
not to your liking,
The grill display indicates a power level between 1 and 5
(1 for minimum power and 5 for maximum power).
a recommended cooking time is associated with
each cooking mode. You may change the
recommended cooking time by pressing
and keys
"+" and/or "-" (cooking time must include approximately
10 minutes for the oven to pre-heat). The cooking time
is memorised, but you still have another 3 seconds to
modify it.
During the pre-heating phase, symbol blinks and
the cooking time is displayed.
(B) Programmed cooking with delayed start
The programmer automatically selects the cooking start
time according to the parameters you have set: cooking
time and end cooking time.
Proceed as follows:
set the function selector to the selected mode,
set the temperature using the temperature control
if the recommended one is not to your liking.
The grill display indicates a power level between 1 and 5
(1 for minimum power and 5 for maximum power).
press key to set the cooking time,
set the cooking time by pressing keys "+" and/or "-
" (cooking time should include the pre-heating time):
the cooking time is memorised, but you still have
another 3 seconds to modify it.
The current end time is displayed. This has been
calculated by adding the chosen cook time to the
current time.
to delay cooking, you need to set the end cooking
time by pressing and then "+" and/or "-" repeatedly:
the end cooking time is memorised, but you still have
another 3 seconds to modify it.
The minimum programmable cooking time is 2 minutes.
The maximum programmable cooking time is 10 hours.
press key , "Auto" comes on.
From now until the start of cooking, only the temperature
and the mode can be modified.
When the cooking start time has been reached, the oven
is turned on and pre-heating begins, during which symbol
blinks; the cooking time is displayed. ".
When pre-heating is complete, symbol stops blinking and the oven emits 3 acoustic beeps.
There is no pre-heating phase when using the "fast cooking" and "grill" modes.
The amount of time left until cooking is finished is displayed during cooking. To see the temperature, press key "+".
The minimum programmable cooking time is 2 minutes. The maximum programmable cooking time is 10 hours.
press key to start cooking.
If you fail to press the cooking start key one minute after having selected a mode, the word "END" comes up on the
display and the keys are disabled. In this case, set the mode selector back to "0" and proceed with the various adjustments.
When cooking is finished, a buzzer sounds for one minute and the word "END" comes up on the display; you can
stop the buzzer by pressing any of the keys.
Set the function selector knob back to "0": the word "END" disappears and "OFF" comes up for 3 seconds.
During cooking, you can change the cooking mode (without affecting the cooking time or temperature), the temperature
(without affecting the cooking time) and the cooking time.
You can bring the cooking to a stop and turn the oven off just by setting the mode selector knob to "0". In this case, the
word "OFF" is displayed for 3 seconds before it comes off.
Then, if programming cooking with either immediate start (A) or with delayed start (B) continue as follows:
How to set a Programme to Switch Off and On Automatically