Filter
Top Products
6
GB
The first time you use your appliance, heat the empty
oven with its door closed at its maximum temperature
for at least half an hour. Ensure that the room is well
ventilated before switching the oven off and opening
the oven door. The appliance may emit a slightly
unpleasant odour caused by protective substances
used during the manufacturing process burning away.
The Control panel lock and DEMO mode can be
activated/deactivated even when the control panel is
switched off.
If no button is pressed within 2 minutes of the oven
being switched on, the appliance will be switched
off automatically.
Control panel lock
To lock the oven controls, press the button, the
START/STOP button and the time + button on the
right hand side of the control panel in sequence. A
buzzer sounds and the TEMPERATURE display
shows Loc.
To unlock the oven controls, press the
button
and the time - button on the right hand side of the
control panel in sequence.
The control panel lock function can be activated
when a cooking programme is in progress or when
the oven is switched off, or when a cooking end time
has been set and the start button pressed. The
control panel lock function can also be deactivated
in all the above situations and after the oven has
completed the set cooking programme.
Demo mode
The oven can operate in DEMO mode: all heating
elements are deactivated, and controls remain operative.
To deactivate the DEMO mode, while the oven is
switched on press the ON/OFF button, the START/
STOP button and the time "+" button on the right
hand side of the control panel, in that order.
To deactivate the DEMO mode, while the oven is
switched on press the ON/OFF button and the time
- button on the right hand side of the control panel.
A buzzer sounds and the time display shows D off.
The DEMO mode can only be activated when the
oven is switched on and no cooking programme has
been commenced.
Setting the clock
The clock may be set when the oven is switched off
or when it is switched on, provided that a delayed
cooking cycle has not been programmed previously.
1. Press the
button several times until the
icon and the two digits on the TIME display flash.
2. Press the + and - buttons to adjust the hours.
3. Press the
button.
4. Press the + and - buttons to adjust the minutes.
5. Press the
button again to confirm.
Setting the timer
This may be set while the oven is switched off or
while it is switched on.
1. Press the
button several times until the
icon and the three digits on the TIME display flash.
2. Press the + and - buttons to adjust the
minutes;
3. Press the
button again to confirm.
Switching the oven on
Press the button to switch the oven on or off.
Starting the oven
Press the button to select the desired manual
cooking mode. The cooking temperature and
duration may be set.
Press the
button to select the desired automatic
cooking mode. The cooking temperature and
duration are both set to default values. The duration
may be modified by ±5/10 minutes, depending on
the selected cooking mode. The text In which
appears on the TEMPERATURE display stands for
place the food IN the oven. A delayed cooking
cycle may be programmed.
Begin cooking by pressing the START/STOP
button. The oven will begin its preheating stage, and
the current preheating temperature indicator lights
illuminate when this stage is complete. The
temperature of the manual cooking modes may be
adjusted by pressing the + and - buttons on the
left hand side of the control panel.
When the preheating stage is complete, a buzzer
sounds and all current preheating temperature
indicator lights are illuminated: place the food in the
oven.
During cooking it is always possible to:
- Change the temperature by pressing the + and -
buttons on the left hand side of the control panel
(manual cooking modes only).
- Interrupt cooking while maintaining the set duration
by pressing the START/STOP button.
Start-up and use