Filter
Top Products
43042-01 02/21/2008
7
0000
0000
0
A15
A18
A20
A19
A17
A16
F
H
I
G
E
Connect wiring from the motor to the wiring cover plate. Reinstall the motor by inserting the tabs and pushing up into
position. Make sure the wires are not pinched
between the motor and the housing.
Secure the motor by tightening the 2 screws.
Turn on the power source.
Connect 4” duct and vent to the outside. Tape joints.
If ducting does not fit securely, an adapter may need
to be purchased.
Install the wiring cover plate. Make sure all
wiring connections are inside the box or under
the wiring cover plate.
ENGLISH