Filter
Top Products
43043-01 01/24/2008
7
A19
I
A20
Connect wiring from the motor to the wiring cover
plate.
0000
A17
0000
H
A18
ON
OFF
A21
A2 2
E1
Go to step
on page 17
to attach grille.
Reinstall the motor by inserting the tabs and pushing
up into position. Make sure the wires are not pinched
between the motor and the housing.
Secure the motor by tightening the 2 screws.
Turn on the power source.
Test the motor. If the motor does not run, check the
plug connection.