Filter
Top Products
C17
C18
C19
C20
12
C15
C16
Drill a hole in the center of each outline. Insert screws, leaving space between the screw head
and the joist. Screws are not provided.
Attach the rails onto the screws. Tighten screws.
Connect 4” duct and vent to the outside. Tape joints.
If ducting does not fit securely, an adapter may
need to be purchased.
Route wires through the strain relief.
41954-01 3/13/2006 41954-01 3/13/2006
HF0022_Eng_3.13.06.indd 12 3/12/06 6:03:17 PM