Hunter Fan 90052 Ventilation Hood User Manual


 
41718-01 01/28/2008
12
C17
C18
C19
C20
C15
1/8” Bit
C16
Drill a hole in the center of each outline. Insert screws, leaving space between the screw head
and the joist. Screws are not provided.
Attach the rails onto the screws. Tighten screws.
Connect 4” duct and vent to the outside. Tape joints.
If ducting does not fit securely, an adapter may
need to be purchased.
Pull wires through the strain relief.
028_41718_EngS_1.28.08_Arial.indd 12 1/28/08 10:47:33 AM