Filter
Top Products
A19
I
Secure the motor by tightening the 2 screws.
A20
Turn on the power source.
7
Connect wiring from the motor to the wiring cover plate.
0000
A17
Reinstall the motor by inserting the tabs and pushing up
into position. Make sure the wires are not pinched
between the motor and the housing.
0000
H
A18
ON
OF
F
A21
Test the motor. If the motor does not run, check the plug
connection.
A22
E1
Go to step
on page 17
to attach grille.
41718-01 3/29/2006 41718-01 3/29/2006
41718_EngS_3.29.06.indd 7 3/29/06 10:40:09 PM