Filter
Top Products
•
D18
G
Tighten the wiring cover plate screw.
D17
F
1
2
Install the wiring cover plate. Make sure all
wiring connections are inside the box or under
the wiring cover plate.
D19
H
D20
H
I
D21
D22
17
Reinstall the motor by inserting the tabs and pushing up
into position. Make sure the wires are not pinched between
the motor and the housing.
Connect wiring from the motor to the wiring cover plate.
Secure the motor by tightening the 2 screws. Turn on the power source.
41722-01 3/29/2006 41722-01 3/29/2006
41722_EngS_3.29.03.indd 17 3/29/06 10:55:19 PM