Filter
Top Products
IGHT-RHR, RHR2-HEX-0608
8
Electrical
Wiring Color Code
Electrical Circuit Identication
Standard lighting for all models will be uorescent lamps
located within the case at the top.
The switch controlling the lights and heaters are located
within an access panel on the side of the case.
BEFORE SERVICING
ALWAYS DISCONNECT ELECTRICAL
POWER AT THE MAIN DISCONNECT
WHEN SERVICING OR REPLACING ANY
ELECTRICAL COMPONENT.
This includes (but not limited to) Fans, Heaters
Thermostats, and Lights.
Field Wiring and Serial Plate Amperage
Field Wiring must be sized for component amperes printed
on the serial plate.Actual ampere draw may be less than
specied. Case amperes are listed on the wiring diagram,
but due to parts availability they may vary slightly. Always
check the serial plate for the actual loads.
Ballast Location
RHR-HEX 6' & (4')
Self-Service Hot
Control Panel
Ballast
Ballast
(one for each light)
RHR2-HEX 6' & (4')
Self-Service Hot
Scale = 1/2"
Control
Panel
Ballast
Ballast
(one for each light)
Ballast for shelves