Ice-O-Matic CD 40022 Ice Maker User Manual


  Open as PDF
of 2
 
Dimensions and Air Flow
CD 40022 Push 120 (55) 115/60/1 2 2.1 15 199 (91)
CD 40522 Push 120 (55) 230/50/1 2 2.1 15 199 (91)
ICE-O-Matic’s
®
machines are not designed for outdoor installations. ICE-O-Matic
®
remote condensers are designed for outdoor installations.
Machine requires voltage indicated on rating name plate. Failures caused by improper voltage are not considered factory defects. Extended
periods of operation at temperature exceeding limitations constitutes misuse under the terms of ICE-O-Matic
®
Manufacturer’s Limited Warranty,
resulting in a loss of warranty coverage.
Model Dispenser ARI Bin Voltage Min. Circuit Maximum Shipping
No. Operated by: Storage Capacity Characteristics No. of Wires Ampacity Fuse Size Weight lbs. (Kgs.)
ORDERING AND SPECIFICATION INFORMATION
Air out -
(side discharge)
Air in -
(rear of ICE Maker)
53.25"
(1553 mm)
22"
(559 mm)
24"
(610 mm)
33.5"
(851 mm)
OPERATING LIMITS
Ambient Temp. Range
Air & Water 50° - 110°F (10° - 43°C)
Water Temp. Range 40° - 100°F (4.5° - 38°C)
Water Pressure Ice Maker Min. 20 psi (1.4 bar)
Water in Max. 60 psi (6.9 bar)
Condenser Inlet Water Min. 20 psi (1.4 bar)
(Water cooled only) Max. 60 psi (6.9 bar)
CD 40022 Series Hotel Dispenser
60 Hz
50 Hz
Air-Cooled lbs. (kgs.) 320 (145) 301 (137) 506 (230) 478 (217)
Water-Cooled lbs. (kgs.) 355 (161) n/a 528 (240) n/a
Remote-Cooled lbs. (kgs.) n/a n/a n/a n/a
Voltage Char. 115/60/1 2320/50/1 115/60/1 230/50/1
1. Tested at 70º Air/50º Water.
2. All specifications and performance data are subject to normal manufacturing variances.
Note #1: Model CD40022 and CD40522 dispensers accept all 22” ICE Series™ Cube ICE Makers
Note #2: CD40022 and CD40522 Series units do not require an Adaptor and Bin Level Kit
Model
ICE 0320 ICE0325 ICE 0520 ICE 0525
ICE PRODUCTION FOR OPTIONAL CUBE ICE MAKERS
— POUNDS (KILOGRAMS) PER 24 HOURS
ICE-O-Matic 11100 E. 45th Avenue, Denver, CO 80239
Tel. 303 371-3737 Fax. 303 371-6296 www.iceomatic.com
We reserve the right to make changes in design and construction at any time
without obligation.
2004 © ICE-O-Matic Rev Code: 4005A - 11/03-SS
I
S
O
9
0
0
1
C
E
R
T
I
F
I
E
D
Half Cube
7/8" x 7/8" x 3/8"
(22mm x 22mm x 10mm)
Full Cube
7/8" x 7/8" x 7/8"
(22mm x 22mm x 22mm)
23"
(584 mm)
22"
558.8
6"
152.4
53 1/4"
1351.3
ICE FILL STATION
8 3/4 [221.5] HIEGHT
13 1/2 [342.9] WIDTH
8 1/2 [215.9] DEPTH
33 1/2"
850.1
25 5/8"
650.6
16"
406.4
1"
24.1
3 1/2"
88.9
7"
179.1
POWER
CORD
3/4 FPT
DRAIN
(2) 5/16-18 UNC
ICE HEAD
 previous