Filter
Top Products
17
Building In
These hobs can be inserted in a
built-in kitchen unit whose depth is
between 550 and 600 mm.
The hobs dimensions are shown in
Fig. 4; the cut out dimensions are
shown in Fig. 5.
The edge of the cut out must have a
minimum distance from the rear wall of
55 mm.
If there are side walls, or sides of the
furniture unit near the hob, the cut out
edges must have a minimum distance of
100 mm.
Hanging forniture units or hoods
must be placed at 650 mm minimum
from the hob.
Fitting the hob to the worktop
Carry out the building in of the hob
as follows:
1. Place the seals supplied with the hob
on the front edge of the cut out.
A = Auxiliary burner
SR= Semi-rapid burner
TC= Triple Crown burner
Fig. 5
Dimensions are given in millimeters
510
594
TC
SR
A
SR
Fig. 4