IKEA CG3 Oven User Manual


 
Built-in ovens and built-in cooking surfaces
are fitted with special connection systems.
For safety reasons, you must only combine
appliances from the same manufacturer.
If the range is placed on a base, measures
have to be taken to prevent the appliance
slipping from the base.
Electrical connection
Warning! Only a qualified electrician
and competent person must do the
electrical installation.
The manufacturer is not responsible if you
do not follow these safety precautions.
Ground the appliance according to safety
precautions.
Make sure that the rated voltage and type
of power on the rating plate agree with the
voltage and the power of the local power
supply.
This appliance is supplied without a plug
and a connection cable.
The following cable types are suitable for
use as mains cables, taking into account the
respective rated cross-section required:
H07RN-F, H05RN-F, H05RR-F, H05VVF,
H05V2V2-F (T90), H05BB-F.
Any electrical component must be installed
or replaced by the After Sales Service tech-
nician or qualified service personnel.
Always use a correctly installed shockproof
socket.
Do not use multi-way plugs, connectors and
extension cables. There is a risk of fire.
Make sure that the mains plug is accessible
after installation.
Do not pull the mains cable to disconnect the
appliance. Always pull the mains plug.
Connect the appliance to the mains using a
device that allows to disconnect the appli-
ance from the mains at all poles with a con-
tact opening width of at least 3 mm, eg. au-
tomatic line protecting cut-out, earth leak-
age trips or fuse.
This appliance complies with the E.E.C. Direc-
tives.
ENGLISH 8