Cornelius 569000261 Beverage Dispenser User Manual


  Open as PDF
of 3
 
2
569000261
1.50
TEMPLATE
(ITEM 2)
HOOD
LOCK KEY
(ITEM 3)
KEY-LOCK SWITCH
(ITEM 5)
HEX NUT
(ITEM 4)
FIGURE 1. DISPENSER HOOD
6. Install KEY-LOCK SWITCH (item 5) in the hood as shown in Figure 1 and secure with HEX NUT (item 4).
7. Refering to Wiring Diagram (Figure 2) disconnect black electrical wire, with push-on terminal on it’s end,
from terminal on the transformer outlet.
8. Connect black electrical wire, disconnected from the transformer outlet terminal, to mating electrical wire
terminal on the WIRING HARNESS (item 1).
9. Connect other electrical wire of the wiring harness to output terminal on the transformer where the black
electrical wire was disconnected from in step 7 preceding.
10. Connect other two wiring harness terminals to two terminals on the Key-Lock Switch.
11. Install hood on the Dispenser.
12. Connect electrical power to the Dispenser, then check Dispenser for proper operation.
13. Insert LOCK KEY (item 3) in key-lock switch, then check Dispenser for proper operation.
KEY-LOCK SWITCH
(ITEM 5 )
WHITE
BLACK
MATING
TERMINALS
FIGURE 2. WIRING DIAGRAM
 previous