Filter
Top Products
Icemaker & Adaptor Hold-Down Kit Installation Instructions
© 2008, IMI Cornelius Inc. - 5 - Publication Number: 629096853INS
3. Locate the two flat, hold down brackets, shown in Figure 9.
Figure 9
4. There are two options for installing the brackets, outside of the side panels or behind the side panels, as
shown in Figure 10. Right side of unit is shown in Figure 10.
Figure 10
5. Place bracket as shown then re-install the black screws as shown in Figure 11, that were removed in Step 1.
Figure 11
6. Using the plate as a template, drill 9/64in. (0.140 in.) holes in the icemaker base, as shown in Figure 12.
CAUTION: Be careful not to drill too deep and/or too fast into the icemaker base and dispenser
wrapper as damage may occur to unseen parts.
Insert Screws