Filter
Top Products
ED/DF300 22” CCM322/522 Nordic Style Lid Kit Installation Instructions
Publication Number: 620204725INS - 2 - © 2007, IMI Cornelius Inc.
the wireform bracket and wrap the tube around the end of the bracket several times, insuring the
tube is secure.
NOTE: The bin stat must not interfere with the agitator rotation or in the path of ice falling from
the icemaker. If it interferes with the agitator or in the path of ice, bend the bracket out of the way.
IMPORTANT: Do not use the spacers provided for mounting the bin thermostat capillary tube to
the Icemaker base.
7. 7. Locate the cleaning caution label (item 5) on the manual ice fill cover (item 4) as shown in Figure
1. Place the manual fill cover in position over the flange on the lid assembly and the front access
hopper opening.
8. The unit is now ready for operation.
FIGURE 1. ED/DF300 Kit
ICEMAKERSEAL TO
ITEM 1 WITH ITEM 3
REFER TOSTEP 4
5
7
4
2
1
3
POSITION ICEMAKER
FLUSH WITH REAR OF LID
ICEMAKER LOCATION
32”
“A”
ICEMAKER
SIZE
6–1/4”
30”
22”
7–1/4”
7–1/4”
“B”
LOCATING
DIM.
USE THE FOUR EXISTING
8-32 BY 3/8-IN. SCREWS
(P/N 70171)
B