Filter
Top Products
3 620917902INS
ICE DIVERTER KIT 02394
NOTE: For dispensing Scotsman, Wilshire, and Hoshizaki compressed ice cubes:
1. Disconnect power to dispenser.
2. Remove Merchandiser from dispenser.
3. Remove ice chute and discard gate restrictor.
4. Install ice diverter on gate mounting plate as shown below.
5. Apply RTV to back surface of ice diverter, to seal to gate mounting plate.
6. Reinstall gasket and ice chute.
7. Reinstall merchandiser and energize unit.
ICE CHUTE
ICE CHUTE
COVER
GATE MOUNTING PLATE
GASKET
STORAGE HOPPER
ICE DIVERTER
10–32 WASHER
10–32 NUT
APPLY RTV TO
THIS SURFACE TO
SEAL TO HOPPER
GATE MOUNTING
PLATE
FLANGE EXTENDS
INTO STORAGE HOP-
PER THROUGH GATE
OPENING
FIGURE 1. ICE DIVERTER KIT