Indesit BIAXXXX Refrigerator User Manual


 
GB
7
The temperature inside the freezer compartment automatically adjusts
itself according to the position of the thermostat knob.
= warmest
= coldest
We recommend, however, a medium position.
ECO is the optimal temperature for energy saving levels.
switches the appliance off, including the refrigerator.
Do not re-freeze food that is defrosting or that has already been
defrosted. These foods must be cooked and eaten (within 24 hours).
Fresh food that needs to be frozen must not come into contact with
food that has already been defrosted.
Do not place glass bottles which contain liquids, and which are
corked or hermetically sealed in the freezer because they could
break.
The maximum quantity of food that may be frozen daily is indicated
on the plate containing the technical properties located on the
bottom left side of the refrigerator compartment (for example:
Kg/24h: 4)
• To maximise space inside the freezer, all drawers [with the
exception of the bottom drawer] can be removed from their
positions and the food placed directly on the racks/glass shelves
supplied [where present].
! Do not open the door during freezing.
! If there is a power cut or malfunction, do not open the freezer door.
This will help maintain the temperature inside the freezer, ensuring that
foods are conserved for at least 9 -14 hours.
! To avoid blocking the air circulation inside the freezer, it is advisable
not to obstruct the ventilation holes with food or containers.
!To maximise space inside the freezer, all drawers [with the exception
of the bottom drawer] can be removed from their positions and the food
placed directly on the racks/glass shelves supplied [where present].
Ice
3
ice tray
The fact that they are situated on the top part of the freezer drawers
ensures greater cleanliness: the ice no longer comes into contact
with the food placed inside the freezer compartment; furthermore,
the dripping of the water during filling is avoided (a lid to cover up the
hole after filling with water is also provided).
1. Pull out the tray by pushing it up. Check that the tray is ompletely
empty and fill it with water through the opening provided.
2. Take care not to exceed the level indicated (MAX WATER LEVEL).
Excess water prevents the ice cubes from dispensing (if this
happens, wait for the ice to melt and empty the tray).
3. Turn the tray 90°: due to the connected compartments each mould
fills with water (see diagram).
4. Close the opening with the lid provided and put the tray back,
placing the top part in the corresponding housing and allowing it
to drop in again.
5. When the ice has formed (minimum time approximately 8 hours)
knock the tray against a hard surface and wet the outside so that
the ice cubes come loose and take them out through the opening.
Maintenance and care
Switching the appliance off
During cleaning and maintenance it is necessary to disconnect the
appliance from the electricity supply:
1. set the FREEZER OPERATION knob on
2. pull the plug out of the socket
WATER LEVEL
MAX
WATER LEVEL
MAX
WATER LEVEL
MAX
Cleaning the appliance
We recommend you clean your fridge with our Professional
Fridge cleaner.To order please call us on 08448 225 225 or
visit www.indesitservice.co.uk
• The external and internal parts, as well as the rubber seals may
be cleaned using a sponge that has been soaked in lukewarm
water and bicarbonate of soda or neutral soap. Do not use
solvents, abrasive products, bleach or ammonia.
• The removable accessories may be soaked in warm water and
soap or dishwashing liquid. Rinse and dry them carefully.
• The back of the appliance may collect dust which can be
removed by delicately using the hose of a vacuum cleaner set
on medium power. The appliance must be switched off and
the plug must be pulled out before cleaning the appliance.
Avoiding mould and unpleasant odours
• The appliance is manufactured with hygienic materials which
are odour free. In order to maintain an odour free refrigerator
and to prevent the formation of stains, food must always be
covered or sealed properly.
• If you want to switch the appliance off for an extended period
of time, clean the inside and leave the doors open.
Replacing the light bulb
We recommend you clean your fridge with our Professional
Fridge cleaner.To order please call us on 08448 225 225 or
visit www.indesitservice.co.uk
To replace the light bulb in the refrigerator compartment, pull out
the plug from the electrical socket. Follow the instructions below.
Access the light bulb by removing the cover as indicated in the
diagram. Replace it with a similar light bulb within the power range
indicated on the cover.
1 1
2
Precautions and tips
! The appliance was designed and manufactured in compliance
with international safety standards. The following warnings are
provided for safety reasons and must be read carefully.
This appliance complies with the following Community Directives:
- 73/23/EEC of 19/02/73 (Low Voltage) and subsequent
amendments;
-89/336/EEC of 03.05.89 (Electromagnetic Compatibility) and
subsequent amendments;
- 2002/96/CE.
PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR 5 YEAR PARTS GUARANTEE ON 08448 24 24 24