3. OVEN DOORS
(a) Control Panel
Regularly wipe with a clean, damp cloth and polish with a
clean, dry cloth.
(b) Trims
It is advisable to clean the trims regularly to prevent any
build up of soiling which may detract from the appearance
of
the cooker. The recommended method of cleaning is to wipe
over the trims with a clean, soft cloth wrung out in warm
water, or mild non abrasive cleaner.
(If in doubt try the cleaner on a small area of trim which is
not noticeable in normal use), then after wiping with a cloth
wrung out in clear water, dry with a clean, soft cloth.
(c) Inner Door Panels & Glass
Open the door fully. The glass panel may now be washed.
Stubborn stains can be removed by using a well soaped, fine
steel wool soap pad.
4. REPLACEMENT OF THE OVEN LAMP
Open the oven door and remove the oven shelves.
Using a thick cloth, grip the lamp lens, unscrew anti-
clockwise and remove the lens.
Carefully unscrew the bulb anti-clockwise. Fit replacement
bulb (15W 300˚C SES). Fit replacement bulb and refit lens.
5. HOW TO CLEAN THE LAMP LENS
Open the oven door and remove the oven shelves.
Using a thick cloth, grip the lamp lens, unscrew anti-
clockwise and remove.
Clean with a non-abrasive cleansing cream and refit
lamp lens.
Care and Cleaning
29
DO NOT use scouring pads, or abrasive powder, which will
scratch the glass.
DO NOT use scouring pads, or abrasive powder, which will
scratch the glass lens
CONTROL PANEL
TRIMS
OVEN
DOORS
MAIN OVEN LAMP
MAIN OVEN LAMP
Warning: To avoid electric shock, please ensure that the
electricity supply to the appliance is switched off and the
appliance is fully cold before removing lamp lens.
Warning: To avoid electric shock, please ensure that the
electricity supply to the appliance is switched off and the
appliance is fully cold before removing lamp lens.