Indesit HI591 IXUK Ventilation Hood User Manual


 
8 GB
Electrical connection and working test
Before connecting to the mains supply ensure that the mains voltage corresponds
with the voltage on the rating plate inside the hood.
Connect the cooker hood to the mains via a double pole switch which has 3 mm
clearance between the contacts.
The appliance must be earthed.
Once the electrical connection has been completed, check that worktop illumination,
motor and speed work properly.
Fitting the telescopic chimney stack
Fit the two plastic supports provided to the top part of the hood.
To fit the upper section item S first expand the chimney slightly to allow it to fit over the
wall brackets (item 2 fig. 1) and then secure the upper section using the 4 screws supplied.
The lower section item I of the chimney stack should be fitted between the lower bracket
2 and the wall.
Fix the U-shaped section to the plastic supports, using two of the screws provided in the
bag of accessories (fig. 7).
Part 2
a
OPERATION AND MAINTENANCE INSTRUCTIONS
Fig. 7
S
I