Filter
Top Products
7
• unscrew the grill burner nozzle using the special socket
spanner for the nozzles (see Fig. F) or better still a
7 mm socket spanner; replace the nozzle with a nozzle
for the new type of gas (see table 1).
V
I
Fig. E Fig. F
Important
On completion of the operation, replace the old rating
sticker with one indicating the new type of gas used. This
sticker is available from our Service Centres.
Note
Should the pressure of the gas used be different (or vary)
from the recommended pressure, it is necessary to fit a
suitable pressure regulator onto the inlet pipe in
compliance with current National Regulations relative to
“regulators for channelled gas”.