Filter
Top Products
13
Insignia NS-BLSS02 Blender
www.insigniaproducts.com
Dishwasher Cleaning
We recommend that you clean your blender by hand. The heat and water
pressure in automatic dishwashers can damage or warp some of the blender
parts. If necessary, you can clean the glass pitcher in a dishwasher if you
remove the pitcher collar, gasket, lid, and blade assembly. To prevent
damage, position the pitcher in the dishwasher rack so it will not hit other
items during cleaning.
Storing your blender
• Make sure that all parts of your blender are clean and dry before storing.
Never store it while it is wet.
• Store your blender with the lid slightly open to avoid trapping odors or
stagnant water in the pitcher.
• Store your blender in its box or in a clean, dry place.
• Store your blender in a location out of the reach of children.
• Never wrap the power cord tightly around the appliance. Use the cord
storage compartment in the back of your blender (see “Power cord
storage feature” on page 5) or keep it loosely coiled.
Troubleshooting
Motor reset feature
Your blender includes a manual reset function in case the blade seizes up and
the motor overheats and stops.
To reset:
1 Unplug the power cord from the wall outlet and make sure that the
blades have stopped moving.
2 Turn the control dial to the OFF position, then let the motor cool for at
least 30 minutes.
3 While waiting, make sure no ice or other contents are lodged between
the blades. Using caution, make sure that the blade turns freely.
4 After 30 minutes, plug the power cord into the wall outlet and
continue using your blender.
Specifications
Dimensions (H × W × D): 16.4 × 7.2 × 8.2 in. (41.7 × 18.3 × 20.8 cm)