Filter
Top Products
LOOSE RING (RE-USE)
MEASURE
FROM ABOVE
(INSIDE BEND
)
A
C
A – Diameter (sink or bowl opening)
C – Diameter (inside bend)
Waste King, Bus Boy 5-7/8" 6-1/2" 11327H Re-use existing clamping ring. Request
#11307 clamping ring if existing
Waste King, Bus Boy 5-7/8" 6-7/8" 11327H clamping ring cannot be used.
Normally Used By
A
C Special Information
ISE Ring
Adaptor No.
4
MEASURE
FROM ABOVE
(INSIDE BEND
)
E
A
C
Hobart 4½" 6-7/8" 5½" 6 11327H Discard previous
adaptor parts.
Normally Used By A E
No. of
Bolt Holes
C
Special
Information
ISE Ring
Adaptor#
A – Diameter (sink or bowl opening)
C – Diameter (inside bend)
E – Diameter (bolt hole circle)
5
A
C
SNAP-
RING
GROOVE
MEASURE
FROM ABOVE
(INSIDE BEND
)
A – Diameter (sink or bowl opening)
C – Diameter (inside bend)
Hobart 5" 5-7/8" 11327J Discard previous adaptor parts (clamping
ring supplied).
G.E. 6" 6-3/8" 11378E Discard previous adaptor parts – has snap
ring groove on outside of sink throat.
Normally Used By
A
C Special Information
ISE Ring
Adaptor No.
6
A
NO FLANGE
MOUNT
D
A – Diameter (sink or bowl opening)
D – Diameter
Red Goat, Insinger 4½" 1-1/8" 11378C 4¾" rubber connection sleeve and
clamping bands. Support legs required.
Waste King 6" 1-1/8" 11378A 6¼" rubber connection sleeve and
clamping bands. Support legs required.
Red Goat, Insinger 7" 1-1/8" 11378B 7¼" rubber connection sleeve and
clamping bands. Support legs required.
Master 8" 1" 11599K 8¼" rubber connection sleeve and
clamping bands. Support legs required.
Normally Used By
A
D Special Information
ISE Ring
Adaptor No.
7
A
D
RAISED
BEA
D
A – Diameter (sink or bowl opening)
D – Diameter
Normally Used By
A
D Special Information
ISE Ring
Adaptor No.
8
Salvajor 4-7/16" 1" 11599N Has raised bead on outside of sink throat.
Support legs required.
Salvajor 6-5/8" 1" 11599H