Filter
Top Products
1
Answer/end
button
Manage your
calls directly
from your
headset
3
Charging socket;
Charge from AC
adaptor, PC via
USB cable, or in-car
charger
4
Volume control
Control the
call volume
without
accessing your
mobile phone
2
Dedicated
pairing button
Pairing is
simple with this
one-touch button
A pure design attitude
Jabra JX10 series II – A style icon that just got better
The JX10 series II takes the JX10 one step further. Featuring the
trademark sleek design from the European Design House of Jacob
Jensen; JX10 series II has been given an internal makeover - giving it
even greater performance than before.
It’s what is inside that really counts
The popular JX10 design remains, but under the shell a number
of improvements have taken place.
JX10 series II has been upgraded to Bluetooth 2.0 and e-SCO – for
improved audio quality.
Multipoint - for the business user
JX10 series II has been upgraded with Multipoint software, making it an
invaluable business tool. Multipoint software means the JX10 series II
can be connected with two devices at any one time. (For example an
oce IP phone, desk phone and mobile phone may have simultaneous
connection.*)
In-car charger - designed by Jacob Jensen
JX10 series II is now even easier to charge when on the move – a stylishly
designed in-car charger is now a standard accessory in the box.
*Device dependent - requires Bluetooth enabler
Quick start guide
Making a call
When you make a call from your mobile phone, the call will automatically
transfer to your headset. If your phone does not support this setting,
just tap the answer/end button to transfer the call to the headset.
Answering and ending a call
Tap the answer/end button on your headset to answer a call.
To end your call, just tap the answer/end button again.
Last number redial
Double tap the answer/end button for 1 second to redial the most
recent number dialed.
Basic functions
1. Fully charge your Jabra JX10 until the LED turns green and switch on by
pressing and holding the answer/end button.
1
2. Press the pairing button
2
marked to put the JX10 in pairing mode.
3. Set your mobile phone to ‘discover a Bluetooth device’
(see your phone user guide).
4. Press Yes or OK when asked if you want to pair the phone
with the Jabra JX10.
5. Enter passkey or PIN = 0000 (4 zeros), then press Yes or OK.
6. Your phone will conrm when pairing is complete.
7. Release your Jabra!
5
Multi-coloured light
indicator (LED)
Shows status
on Bluetooth,
low battery and
charging
1
4
2
3
5