Filter
Top Products
8
SECTION 2: INSTALLATION/OPERATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS
LEVEL THE DISHMACHINE: The dishmachine is designed to operate while being level.
This is important to prevent any damage to the machine during operation and to ensure the
best results when washing ware. The unit comes with adjustable bullet feet, which can be
turned using a pair of channel locks or by hand if the unit can be raised safely. Ensure that
the top of the tub is level from side to side and from front to back before making any con-
nections.
INSTALLING THE DISHMACHINE: With the machine base set in place,
lift the table (Fig. 7) (with proper flange cutout) over and above machine
so that vertical flange on table cutout fits down inside of machine tub and
horizontal flange on machine tub fits up tight against underside of the
table.
(Fig. 7)
INSTALLING THE VACUUM BREAKER & PLUMBING: Ease
vacuum breaker piping (Fig. 8) supplied with the dishmachine
down through the square cutout in the backsplash of the table
(directly behind the machine). Connect vacuum breaker piping to
machine. The top union connects to its matching half on the bot-
tom of the rinse booster tank (Fig.9). The bottom union of the pip-
ing connects to an adapter pipe which, in turn connects to the
solenoid valve (Fig. 10). The arrows on the solenoid valve indicate
the direction of water flow to the machine. Tighten both of the con-
nections.
(Fig. 8)
(Fig. 9) (Fig. 10)