Filter
Top Products
M24STD-6 INSTALLATION INSTRUCTIONS
3
Installation Instructions 07610-003-26-13
Issued: 08-10-2006 Revised: N/A
•
To mount the undercounter dishmachine,
remove the feet from the frame bottom by un-
screwing them.
•
Set the unit on top of the stand (minus the
feet) on the platform, lining up the holes in the
frame to the corresponding holes in the plat-
form.
•
Secure the unit to the platform by rein-
serting and tightening the feet.
•
Verify that the unit is level prior to making
any utility connections. If the unit is not level,
it may operate inefficiently.
After Maintenance Actions:
• Wipe down the stand to remove any
excess silicon.
•
Once the dishmachine is fully hooked
up and operational (per the manufac-
turer’s instructions), operate the ma-
chine and observe it to ensure that
there is no excessive vibration or any
other source of concern.
Preventative Maintenance:
• Keep the area under the platform free
of dirt, soil and debris.
•
Clean the stand regularly with a wet
towel to prevent the build-up of residue
and soil.
Figure 3—Applying silicon