Jenn-Air JDR8895AAB/S/W Double Oven User Manual


 
24 16023417 ©2004 Maytag Services
Disassembly Procedures
To avoid risk of electrical shock, personal injury, or death:
disconnect electrical and gas supply before servicing.
WARNING!
Lower Latch Assembly
NOTE: Removal of range from installation position is
required.
1. Disconnect power before servicing.
2. Remove oven door, see "Oven Door(s)-Door Removal"
procedure.
3. Remove range from installation position, see "Move
and/or Replacing Range" procedure.
4. Remove maintop, see "Maintop Removal" procedure.
(Perform steps 1 – 6.)
5. Remove left side panel, see "Side Panel" procedure.
6. Disconnect and label wiring from door lock switch and
motor.
7. Remove screws securing latch assembly and slide
assembly from range.
8. Reverse procedure to reassemble.
Lower Oven Door