Filter
Top Products
Product dimension, cutout and installation specifications are provided for planning purposes only. Before installing
any product, be sure to verify cutout dimensions and electrical/gas connections as actual product dimensions may vary.
JENN-AIR
®
DETAILED PLANNING DIMENSIONS
2 of 4
JRC120028A 07/2012
36" INDUCTION COOkTOP
JIC4536X – 36
1
⁄4" x 4
1
⁄8" x 21
3
⁄8"
OPENING/CLEARANCE DIMENSIONS
MODEL # JIC4536X
in cm
A
Width of combustible area above
cooking surface (min.)
33
1
⁄8 84.0
B
Width from cooktop to fixed wall
or other combustible material (min.)
1 2.5
C
Width to outer edge of outlet (min.) 10 25.4
D*
Height to bottom of uncovered wood or
metal cabinet above cooking surface (min.)
30 76.2
E
Height to bottom of uncovered wood
or metal cabinet (min.)
18 45.7
F
Required height of ventilation opening in
front cabinet under countertop for proper
ventilation – full width of cooktop
3
⁄16 0.5
G
Height to top edge of outlet (min.) 12 30.5
H
Depth of upper cabinet (recommended) 13 33.0
I
Depth from cutout to wall (min.) 1 2.5
J
Width of cutout 33
1
⁄8 84.0
K
Depth of cutout 19
1
⁄4 49.0
L
Depth from cutout to front of countertop 2 5.1
e
Recommended electrical access location
* Dimension can be reduced by 6" (15.2 cm) when bottom of wood or metal cabinet
is covered by not less than
1
⁄4" (0.6 cm) flame retardant millboard covered with not
less than No. 28 MSG sheet metal, 0.015" (0.4 mm) stainless steel, 0.024" (0.6 mm)
aluminum or 0.020" (0.5 mm) copper.
If installing a hood or microwave hood combination above the cooktop, follow the
hood or microwave hood combination instructions for dimensional clearances above
the cooking surface.
ELECTRICAL REQUIREMENTS
240 volt, 60 Hz, AC only, 50-amp fused, grounded circuit is required.
A dedicated circuit is recommended. The length of conduit provided is
for serviceability to the cooktop.
LOCATION REQUIREMENTS
• To ensure cooktop base clearance, cabinet side walls need to be wider
than the cutout.
• If cabinet has a drawer, allow a 5
1
⁄8" (13.0 cm) minimum clearance
between countertop and top of drawer.
COOKTOP OVER SINGLE WALL OVEN INSTALLATION
REQUIREMENTS
• For approved model number combinations, refer to the under counter
label on the bottom of the cooktop burner box.
• To install a cooktop over a single wall oven, refer to page 3.
TOP VIEW – CUTOUT
FRONT VIEW
SIDE VIEW
D*
H
J
L
K
E
C
e
BB
I
G
I
Side
Cabinet
A
F
D*
H
J
L
K
E
C
e
BB
I
G
I
Side
Cabinet
A
F
D*
H
J
L
K
E
C
e
BB
I
G
I
Side
Cabinet
A
F