Jenn-Air JMC8100ADB Microwave Oven User Manual


 
TROUBLE POSSIBLE CAUSE POSSIBLE REMEDY
ERROR(ERROR1,2) * ERRORl: lf door is opened Press STOP/CLEAR and
message appears in before time countdown restart using Timed
the display window, appears in the display. Cooking on page 14.
'. ERROR2: If the oven has Press STOP/CLEAR and
not been plugged into a wait for 5 minutes to
power supply for more than restart from step 1 of
5 minutes when you start Auto Sensor
Sensor Cooking. Microwaving on
page 16.
Why couldn't l get The food was not covered See pages16 -17 and 24
good results even properly. -25 for instructions on
though I cooked food how to prepare food.
using Auto Sensor STOP/CLEAR was pressed Do not open the door or
Cooking? or the door was opened press STOP/CLEAR
while the sensor was while display shows
programming the right SENSOR COOKING.
cooking time and power
level.
The food being cooked was ° Use Timed Cooking.
not suitable for Auto (see page 14)
Sensor Microwaving
There may have been too When cooking more
much or not enough food to than 2Ibs (900 g) or less
ensure proper results from than 4 oz. (115 g) of
Auto Sensor Microwaving. food, use Timed
Cooking on page 14.
32