Other Hints On Caring
For Your Refrigerator
[Replacing Light Bulbs ]
it isrecommendedthatyou disconnect thepowercordbeforereplacing lightbulb:
Toreplace the upper refrigerator light bulb: (t) graspthelightshield neartheendsan
pull out until the shield pulls free of the retainer lugs; (2) unscrewbulb and replace wil
a 40 watt appliance bulb (60 watt appliance bulb for Model JRS207, JRSD2250 ar
JRSD2450); and (3) hook the light shield over the upper retainer lugs and press in ;
the bottom until the shield snaps in place.
To replace the lower refrigerator light bulb on some models: (1) remove the Ten-
Control Drawer; (2)usingtwo hands, spreadthetop adbottomofthe lightshieldver_ica
away from each other and pull to the front to remove; (3) unscrew the bulb and repla,
itwith a 40 watt showcase bulb; (4) using two hands, spread the top and bottom of tl
lightshieldandpush itintoplaceengaging tabsinslots;and(5)replace theTemp ContJ
Drawer.
To replace the freezer light bulb: (1) remove the ice cube dispenser bin and the t_
freezer shelf; (2) unhook the tabs on the top of the lightshield by pressing in with yo
thumb onthe center top ofthe lightshield; (3)pivottheshielddown; (4) unscrewthe b,
when itis cool and replace itwith a standard 40 watt appliance bulb; (5) pivot the shi
up into place, snapping the tabs into the slots: (6) replacethe freezer shelf and the
cube dispenser bin.
LGoing On Vacation ]
If you will be gone for a month or less, leave the control knob at its usual setting.
During longer absences, {a) remove all food, (b) disconnect from electrical outlet,
clean the refrigerator thoroughly, including defrostpan, (d) leavedoors open to pre_
odor formation, and e) turn off water supply to ice maker, if practical
16