Filter
Top Products
BUILT-IN UNDER COUNTER WINE CELLAR PANEL
1. A custom handle (not supplied) must be installed. Drill pilot holes through the custom panel to match the handle.
Countersink the holes in the back of the panel. Attach the custom handle to the front door panel assembly.
The custom handle screws should be installed through custom panel and into the custom handle. The screw heads
should be countersunk so the inside panel surface can be installed flush with the wine chiller door.
2. Custom Wood Frame thickness: 5/8" (1.6 cm) - 3/4" (1.9 cm).
NOTES:
Style of product may vary from picture
A
B
C
Back View
H
D
G
F
E
H
PRODUCT DIMENSIONS
For a 3 1/2" (8.9 cm) Toe Kick
COVERS THE ENTIRE DOOR EXTRUSION
INCHES CENTIMETERS
A 30
5
/16 77.0
For a 4" (10.2 cm) Toe Kick
TO MATCH EXISTING CABINET TOE KICK HEIGHT
INCHES CENTIMETERS
A 29
13
/16 75.7
Common Dimensions for Both Applications
INCHES CENTIMETERS
B 23
7
/16 59.5
C 15
5
/8 39.7
D 7
13
/16 19.8
E 22
1
/2 57.2
F 15
5
/32 38.5
G 7
13
/16 19.8
H
23
/32 1.8
Important: Because of continuing product improvements, Jenn-Air
®
reserves the right to change specifications without notice. Dimensional specifications are provided for
planning purposes only. For complete details see installation instructions that accompany each product before selecting cabinetry, making cutouts or beginning installation.