Filter
Top Products
MAINTENANCE
5
CLEANING
Surface Maintenance:
Clean periodically with hot soapy water and clean cotton cloth. Do not use corrosive or abrasive
detergent (e.g. Comet powder scrub, EZ-Off oven cleaner), or steel wool/scouring pads which will
scratch and damage surface.
For heavier soil use liquid degreaser such as “Formula 409” or “Fantastic” brand cleaner.
After cleaning, you may use non-abrasive stainless steel polish/ cleaners such as 3M or ZEP, to
polish and buff out the stainless luster and grain. Always scrub lightly, with clean cotton cloth, and
with the grain. Do not use any product containing chlorine bleach. Do not use “orange” cleaners.
Metal Filters
The Metal Filters fitted by the factory are
intended to filter out residue and grease
from cooking. They need not be replaced on a
regular basis but are required to be kept clean.
Filters should be cleaned after every 30
hours of use. Use the Filter Clean
Reminder function on the controls to
determine when filters require cleaning.
Remove and clean by hand or in
dishwasher. Spray 'Formula 409' or
equivalent degreasing detergent and leave
to soak if heavily soiled.
Dry filters and re-install before using hood.
Replacing Metal Filters
Should filters wear out due to age and
prolonged use, replace with following part
number:
Also replace any damaged filter that has
punctured or broken mesh, bent or broken frame.
Hood Model: Part No. Filters in pkg.
JXT8836ADS XXXXXXXX 3